Oats

It's fast becoming Summer and the grass is growing faster than I can even think about cutting it.
In the fields are witchgrass, rye, wheat, and many others but the showiest in mid-May are the individual plants or stands or fields of oats (avena sativa).

 I've enjoyed listening to the birds and watching the young immature flowers/seeds swing and dangle in the breeze--akin to watching the flickering of a fire or the lapping of the waves. Rhythmic and predictable; so barely but infinitely variable.

I've been cutting them and bringing them in and I have carafes and jam jars, water glasses and vases full of stems and stalks.
Green dangling jewels like earrings or bangles or dry, spiny, bearded, spring-loaded seed heads or the flags they leave behind--"we're off, we're off" for the wind to rustle.

 Here are a few oat-inspired etagami.
The Japanese reads, "they invented dance"--my way of acknowledging the seeming joyful swaying and and almost synchronous ballet of fields of little green ballerinas.
Above, instead is a drypoint print--the sprig of green, immature oats drawn and then incised with a sharp point onto a flattened, recycled, Tetrapak container, and printed with a small press.

Man of War

I pulled several copies of the aluminum drypoint plate I made yesterday. I used a pthalo blue etching ink (Akua) and have been trying different wiping techniques/materials.

The prints are getting better but they are still printed pretty badly--too much ink here and there and too little in other places. My best luck was with a stiff tarlatan--that's what they're used for after all-- but I'll try to find someone who can show me how to wipe and if my ink is too stiff/loose. I'm still hoping to make a go with these water-soluble inks as clean up is really easy and there are no solvents to deal with.
I wiped ink on with a piece of matboard/scraped it off and then lightly buffed the plate with a big ball of tarlatan cloth slowly wiping off the ink. Then I went in with a bit of rolled/pointed newsprint to pull out some highlights and lastly wiped lightly with the side of my hand.





The last three I printed over an initial printing of a solid color using a piece of plexiglass plate.
I rolled color onto the plexiglass plate corresponding to where the aluminum plate would go later--lifted out the jellyfish body and some of the tenticles/stingers with a Q-tip and printed that first--one dark, the second ghost was lighter. Then, inking the plate each time, I printed the etching plate on top of the already tinted paper.


The last one is a true monoprint--I painted in my usual badly chosen colors on the plexiplate; blue for sky/blue for water, purple jelly, multicolor tenticles. It's loose and kind of interesting and would have worked if I had chosen colors more carefully; the green in particular was rather ill-advised.



I'll tip in watercolor in one of the poorly printed drypoints and see what that looks like.

P.S. If you get stung by one of these--hot water works best at neutralizing the stinging cells once you peel off the sticky stinging strings as best you can. They really hurt and can scar.

Drypoint Man of War

Itching to do something and I've been working with variations of this sketch for weeks.

The idea is quite simple; a Portugese Man of War--a floating, stinging jellyfish common to the Atlantic in Winter as an exercise in composition and color.
I've been envisioning this in color woodblock but haven't committed yet to how many blocks or colors and figured this would be a quick way to scratch in an idea and play with some color after.

I want a strong flowing diagonal for the drifting tentacles and the float should be a transparent/iridescent pale purple set off by varying shadings of the sky and deep waters.




That's the idea anyway.
This has been scratched into the leftover scrap of aluminum sheeting that I have
6 X 13" in size and I'll try printing in the AM.

parasites

Tapeworm 8" X 9" drypoint etching on Rives Heavyweight paper. Trial proof.

Been in a bit of a bad temper lately. This one's been brewing for a while and is rooted in some mid-life issues about success, failure, hopes and disappointments and some big and seemingly unresolvable conflicts. These moods are cyclical and will usually pass if I just wait long enough but nothing beats back a bad mood like creating something repulsive and pointless. Sort of a spread-the-wealth kind of thing.

I was in the hardware store buying some things for the house and saw they had some sheets of rolled aluminum. 6" X 18" and fairly thin. I took one home, cut it down to about a 6"X 8" size and scratched in this tapeworm using a metal point. I printed a few test copies so I could mess with the press and see how aluminum prints.

This is sort of a made-up tapeworm; somewhat in-between what a taenia solium (pork tapeworm) and dog tapeworm or flatfish tapeworm would look like. They all have fairly complex life cycles passing through multiple requisite hosts. Sometimes pausing forever if stuck in the body of the wrong host. The small end has little hooks and suckers to attach to the lining of the intestine and it slowly grows new segments, elongating segment by segment and can reach 20-30 ft (13m) in length. They don't actually suck blood from the wall of the intestine or stomach but absorb nutrients from the lumen of the intestine through the walls of the segments. Each segment has it's own digestive and reproductive tract and by the time the little segments fragment off and pass through the gut out of the body, they are little time-bomb sacs of eggs waiting to be ingested by the next host to start a new cycle.
Human carriers are usually asymptomatic unless infected by multiple worms that can then cause malnutrition by absorbing so many calories (rare) or severe anemia from B12 deficiency--the worm absorbs all the B12 from the gut(more common). In the cyst stage the pork tapeworm can cause all sorts of medical illness; the cysts can form in the muscle, internal organs and brain and are a common cause of adult-onset seizures in nations where incompletely cooked pork are consumed.

But, as I said, this is more of a metaphorical tapeworm.

What kind of nastiness are you carrying inside?

Jajim: Blues 1 and 2

Monoprints again. I went back into the studio to try and finish these two prints I had started several months back. I had started with an acetate/plexiglass drypoint--the lines scratched into the plexiglass sheet with a metal point. Printed in black on RIVES BFK paper.
Then I started in with blue ink, painted onto the plate with a brush to start giving it some color.

With this session I went back in again painting in the vertical blue stripes with different tonalities of blue ink; mostly Pthalo Blue and some cobalt/ultramarine.
I tried to vary the color a bit with each stripe. and built up the color with two to three layers, each time running them through the press.

The background had been loosely brushed onto the plate and run through the press but I added a rose/quinacradone pink/rose halo around the tapestry part and blurred the edges to make it glow a bit.

Lastly, as my ends had smudged quite a bit, I painted in with a brush and some sumi black ink and white opaque watercolor the black and white trim.




I like the one with the big blue smudge the best--the blues are smokier and richer and the pink/rose really glows due to it being printed on too-wet paper and resisting a bit the paper so it has a mottled/irregular effect that was as accidental as it was serendipitous. I still can't really say I have a grip on the Akua colors--I was using monotype colors--or the press. I'll try to work a little smaller to facilitate some more experiments. Dry paper/wet paper/wetter or dryer ink. Mostly I'm having trouble with lots of smudging at the edges--it may be the nature of the method. The paper and inked plate qet squished together and unless the ink layer is very thin, it has to go somewhere. In my case it seems to be going out the sides.

Skeletons

These are my first two proofs of a drypoint print I started a few weeks ago. I hoped to have a finished work in time for Halloween but I had to content myself with two quick proofs pulled off my first ever copper drypoint.




The plate was a thin 6" X 9" copper sheet on which I first roughly sketched and then scratched into the surface with a sharp metal tip scratching and cutting lines in the smooth surface. The plate was then wiped with AKUA color intaglio black ink and wiped off leaving ink in the scratches and some on the surface. Printed using BIG BLUE, my etching press, onto Arches white printmaking paper.

This is my first go at drypoint and the first time using these inks. I had a hard time wiping the ink--I couldn't find where I had put my tarlatans and ended up using an old cotton rag--(old kids underpants) that were too soft and absorbent.

The First pull was much too pale due to overwiping and so became a candidate for some watercolor tip in to rescue what was just a pale ghost.

I'll go back in to try to give some more emphasis on the hand/fingers and try to deepen the shadows over the whole pelvis area then try another round of printing/wiping.

Fooling around: plexiglass and a drypoint tool

I've been going through my sketchbook again getting ready for my next woodblock print but I've got nothing really ready to go and I've been thinking and looking; doodling and making thumbnails. So, as I had really nothing ready yet to get put on a board I started looking around for something to do today.

I took a piece of leftover plexiglass--it's about 18 X 24" and a drypoint needle I have and sketched out a rough enlargement of one of my previous textile/rug sketches.
The drypoint tool has a really sharp point, and while it would be traditionally be used to scratch a line in copper or zinc plates to be run through a press, I'm using it on the plexiglass to score a line in the soft plastic.

This afternoon I got to try how it would print. I'm still using Akua color--this time I have a tin of lamp black intaglio ink--and straight out of the tub with a piece of matboard scraping a thin layer of ink all across the plate. Then I lightly rubbed it off with an old rag and ran it through the Press onto damp Rives BFK. The ink is supposed to remain in the scratches and areas left by the burr of the point and should mostly wipe clean off the smooth plastic surface.

It's pretty tacky ink and I've never done this before so my wiping was pretty lame.
One came out a bit overwiped in spots and underwiped in others and my second attempt seemed "moodier" but ended up covered with dark fingerprints-spots and underwiped areas too. Still, the incised scribbles came out pretty good and it's pretty close to my sketch in concept and mood. I suspect if I can get the colors to be rich enough all the splotchiness now will add depth and complexity to the stripes/weaving I'm trying to emulate.

Tomorrow I'll try to go in again painting on the plate in color to bring up the vertical stripes in blue and the background in a sepia/tan--the only trick now will be I'll have to redampen the paper so the plate and paper will match up again.